• Tank sizes vary from 0.5L to 1.7L.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.

• DC motors range from 0.55KW to 3.0KW;as well as DC 12 and 24 volts.
• Tank sizes vary from 0.5L to 1.7L.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.

• The W82A power pack can be modified to fit a wide range of tank sizes, pump capacities and hydraulic circuits to accommodate your specific application.
• Complete operating instructions for our high performance system is provided with each W82A power pack.
• All screw-in cartridge valves have been designed to be adjusted easily to service the power pack quickly.
• In addition to Winner standard AC motors, NEMA and B14 standard motors can also be used for the W82A power pack.

The W83AB series power pack is designed for applications that need high pressure and larger flow, but use a low-power B14 Frame motor. The power pack uses a special manifold (W800553).
All screw-in cartridge valves have been designed to be adjusted easily to service the power pack quickly. They still have the same dimensions and functions as the standard manifold (W800532).

• Standard frame sizes from 63M to 112M.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W83D series power pack is designed for applications that need high pressure and larger flow, but use a low-power D.C. motor. The power pack uses a special manifold (W800553).
All screw-in cartridge valves have been designed to be adjusted easily to service the power pack quickly. They still have the same dimensions and functions as the standard manifold (W800532).

• DC motors from 0.55KW to 3.0KW; as well as DC 12 and 24 volts.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W84AB series power pack is designed for applications that need high pressure and larger flow, but use a low-power B14 Frame motor. Because the power pack uses a standard manifold(W800532), they will have the same functions as the W80AB series power pack.

• Standard frame sizes range from 63M to 112M.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W84D series power pack is designed for applications that need high pressure and larger flow, but use a low-power D.C. motor. Because the power pack uses a standard manifold(W800532), they will have the same functions as the W80D series power pack.

• DC motor from 0.55KW to 3.0KW;as well as DC 12 and 24 volts.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W85AB series power pack is designed for applications that need two independent hydraulic power supply, but use a single B14 Frame motor.

• Standard frame size range from 63M to 112M.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available.

The W85D series power pack is designed for applications that need two independent hydraulic power supply, but use a single D.C. motor.

• DC motors from 0.55KW to 3.0KW;as well as DC 12 and 24 volts.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.
  
  Custom made circuit are also available.

The W87A series power pack is designed for a wide range of applications which include

• Our standard AC motors from 0.25HP to 3.0HP.
• Tank sizes vary from 0.5L to 1.7L.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Options: Handle pump; Hi-Low speed lowering solenoid valves; Adjustable output flow; By-Pass solenoid valve.

The W87D series power pack is designed for a wide range of applications which include

• DC motors range from 0.55KW to 3.0KW; as well as DC 12 and 24 volts.
• Tank sizes vary from 0.5L to 1.7L.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Options: Handle pump; Hi-Low speed lowering solenoid valves; Adjustable output flow; By-Pass solenoid valve.

The TG-168 series power pack is designed for "Tail-Gate of the truck" application, which includes the unit and complete components of a power protecting cover, therefore users just need to connect the fittings and control wires.

• Easy to install and service.
• Saves space and costs.
• High quality and quick delivery.

The WL-214 series power pack is designed for "Wheel-Chair or Cargo Lift" application, which include unit and complete components of a power protecting cover, therefore users just need to connect the fittings and control wires.

• Easy to install and service.
• Saves space and costs.
• High quality and quick delivery.